Home » 2021 » November » 01

Daily Archives: November 1, 2021

Calendar

November 2021
M T W T F S S
1234567
891011121314
15161718192021
22232425262728
2930  

Tree Emergencies and The Effects of Storms on Trees

Tree emergencies and how to deal with them.

 

Storms can affect trees in different ways. The effect is influenced by lots of factors including wind direction and speed, rain duration and intensity, location, health and age.

Trees are great at adapting to a change in conditions but this is a slow process that takes decades; they can’t adapt to a single change in weather due to a storm, of course.

Tree emergencies due to storms can take many forms. Storm damage is often different from the damage caused by floods. Of course, both can happen simultaneously.

 

Tree Emergencies Caused by Storms with Flooding

Lots of places around the world have natural floods annually. The shrubs and trees native to these parts have been able to adapt to prolonged periods with their roots submerged.

There are problems if non-native species are introduced in these areas because they have not adapted to being submerged in water since their native areas do not experience flooding.

When the soil is waterlogged, there is a decline in its ability to sustain life. This happens because the available air in the soil is swapped for water. This means that the roots do not have access to essential oxygen supplies.

This means that damage can happen in as little as three hours. Being submerged in water kills the tree’s fine root hairs. This means the tree’s water-absorbing ability is seriously affected. It cannot take up nutrients and water until the water level falls.

When a tree is deprived of oxygen, there is a build-up of gases that lead to the larger tree roots dying. This can affect the tree’s stability.

What’s more, flooding causes the soil’s structure to deteriorate. Particles of clay lose their stickiness, which reduces the soil’s aptitude to grip onto the roots. This means that trees are more likely to fail at the root plate level.

Floodwater also affects the pH of soils. This means that the levels of nutrients and minerals could be affected.

All in all, when soils are flooded, there is both a long-term and immediate effect on tree longevity and health. The longer the flood persists, the worse the problem.

 

Flood Stress Seen in Trees

Tree flood stress is not always visible immediately. It manifests itself in a variety of ways, including:

  • A reduction in the size of leaves for new growth
  • Yellowing of leaves (chlorosis)
  • Epicormic branch and stem growths
  • Crown dieback
  • Lack of new leaves in spring or defoliation
  • Early change of colour in autumn as well as early falling leaves
  • Prolific mast or seed crop the year after the flood

 

Care for Flood-Stressed Trees

Caring for a tree after floods impacts on its survival chances as well as the tree quality that remains.

Here are some steps to help:

  • Remove any build-up of sand or silt so that the soil is back to its normal level. Make sure you also look to cover any roots that have been exposed. This should be done with topsoil.
  • Incorporate organic or composted material like mulch into the topsoil to improve its structure. Make sure you do not damage any roots. Professional tree surgeons will use something called an ‘air spade’ for this task.
  • A layer of mulch or other organic, composted material will help the soil to retain its moisture. Try not to add anything like fertiliser because it uses a lot of the tree’s energy.
  • Watch out for colonisation. Stressed trees often have trouble fighting off secondary organisms like insects, fungi, and bacteria.

 

Storms with no Flooding

When there is no flooding, the main issue with storms is the wind. Trees are susceptible to storm damage when the force of the wind exceeds the tree’s structural strength. This type of storm damage is very obvious; you will often see large parts of the tree snapped or even a whole tree uprooted.

Some storm conditions might cause less obvious damage. Limbs and stems can have fractures while remaining intact. Trees also might be uprooted partially but don’t fall over. There might be broken branches that haven’t fallen.

If the storm involved lightning, you might notice large wounds in the tree’s bark. Lightning strikes can also result in the tree’s destruction. Once subjected to a lightning strike, there is not much that can be done to help a tree.

Luckily, it is rare to see such major storm damage and proactive, expert tree management means you can reduce the risks.

 

Why be Proactive?

Proactive tree work is cost-effective since you can protect your trees with the highest risk and greatest value. Tree work can be scheduled and planned and will avoid those emergency call-outs (and their cost) if there is storm damage.

Unfortunately, with climate change, we are likely to see lots more unsettled and stormy weather. If we want trees to survive well, we need to make sure they’re inspected frequently and well managed.

It’s a good idea to seek comprehensive tree assessments with experienced tree surgeons and tree consultants. They will be able to advise tree owners and help them keep their trees safe as well as healthy.

According to statistics by the Health and Safety Executive (HSE), there are around 5 or 6 people killed each year in the UK due to falling branches or trees. Around 3 of these occur in a public space.

Of course, this makes the risk of being killed or struck by a tree extremely low; these numbers mean the risk is about 1 in 10 million. Despite the low level of risk, we need to consider how the public perceive the level of risk, especially if there has been a recent incident. Thus, tree owners should take great care in ensuring they look after their large trees.

 

Final Thoughts

While typical weather events can help to strengthen trees, excess forces or waterlogging from storms can cause problems. With consistent conditions, trees can adapt and initiate developmental changes to compensate for changing weather patterns.

Thanks to their biological engineering, they can adjust to loading, if the conditions are typical. When storms, floods, ice, or snow occur, the trees might not fare well. Extreme forces cause damage, injuries and even tree death. You can protect your trees with regular tree care by expert tree surgeons.

 


Article was written by Louise W.

Article Source: https://www.graftingardeners.co.uk/tree-emergencies/

Tree Pollarding 101

Tree Pollarding 101 – everything you need to know about pollarding.

 

If you are looking for ways to keep your landscape and trees looking their best, several key methods can make a huge impact on how your outdoor space looks.

A process called tree pollarding can help to create a lush, beautiful landscape that promotes healthy trees.

Read on to learn more about pollarding trees and what the process entails.

 

Tree Pollarding Defined

Most people likely have never heard of tree pollarding, but it is an important part of maintaining healthy trees. The process involves cutting young trees and shrubs to the main stem or trunk to control their height.

The plants are not cut at ground level but instead are cut much higher at an average height of around six feet. This process helps to maintain the desired height for your trees while reducing shade and giving the trees a defined silhouette.

Many people opt for tree pollarding to keep taller trees from getting in the way of phone lines or electrical wires. It is also done to trees located close to a home or place of business to reduce the risk of branches breaking and falling onto the roof.

While most typical tree pruning processes remove the lower and crossing limbs of a tree, the pollarding process is a bit different. Pollarding trees is often done when the tree is dormant rather than when it is actively growing. Doing this while a tree is still young or dormant promotes fuller, faster, and greener growth.

In addition to protecting wires, structures, and promoting better growth, tree pollarding may also reduce the risk of fungus and pests. It can also help to protect your trees from various diseases.

 

How to Pollard a Tree

To pollard a tree effectively, it is best to leave the job to the professionals. They will start by cutting off the central leader of the tree first, then proceed to cut all of the branches around it that are at the same height.

By cutting the top of the tree this way, it shortens the crown of the tree. The gardener will remove lower limbs and any crossing limbs to promote a thicker crown as it grows back.

The younger the tree, the faster the new growth will return, while older trees may take longer to regrow leaves and new branches. By pollarding large young deciduous trees, ensures that they sprout healthily to achieve fuller, greener, and lusher growth.

Once the procedure is complete, most trees will produce “waterspouts” at the various locations where it has been cut. These areas will produce sprouts that should be removed at least once per year or every other year. Eventually, knobs or knuckles will form at these locations and continue to regenerate each year.

The timing of tree pollarding is critical and should be performed during the tree’s dormant season. If the tree is pruned during its growing season, it can stunt the growth, remove its energy source, and inhibit the tree’s ability to re-sprout.

Most tree pollarding is done during the fall or winter months of the year when trees are losing their foliage. This is extremely important because most trees rely on their leaves to help produce energy for healthy growth during the warmer months of spring and summer. Removing sprouts and pollarding too early in the year can cause the tree to stop growing, or even worse – to perish.

 

A Tradition of Pollarding Trees

Tree pollarding originated in Europe centuries ago, and the original method was done to ensure that more abundant, smaller branches were produced. As a result, these smaller branches were removed and used as fuel or for making items such as woven baskets.

As the branches were consistently cut back, farmers would harvest the slender sprouts and use them as a food source for livestock. These slender sprouts were also utilized to help weave small fences and other structures.

Today, pollarding fruit trees is a popular method to ensure healthy growth. When the tree is pollarded correctly, it encourages more production of fruits for a bountiful harvest.

Many urban areas choose to pollard trees that line busy streets to help control their growth, preventing branches from falling onto power lines and roadways. Cutting trees back can keep them healthy while maintaining them at a smaller, more easily manageable size.

The difference between topping and pollarding trees is that tree pollarding produces large knuckles. These knuckles are the source of new growth each year and can help to ensure that the tree continues to grow healthy in the future. Imagine the knuckles on a tree as large scars that heal while new growth re-sprouts from dormant buds during the springtime.

Topping a tree does not lead to knuckle formation. This process cuts the entire top of the tree off, resulting in a large wound that can cause the tree to die. Ideally, pollarding fruit trees and other species is best to ensure a healthy outcome.

 

Pollarding: A Unique Technique

Whether you want to encourage healthy growth or remove threatening branches, tree pollarding is a wise way to go. This unique tree-pruning process will ensure that your trees look lush and beautiful for years to come.

Always consult with a professional arborist or landscaper if you are considering using tree pollarding as a method to ensure best results.

For more information about our services or to find out more, contact us today.

 


Article was written by Conner D.

Article Source: https://www.graftingardeners.co.uk/tree-pollarding-101/

Did you miss our previous article…
https://www.treesforeducation.com/?p=284

WHAT TO AVOID IN HIRING A TREE TRIMMER

So you’re in need for a tree service company? Our recent What to Look for in Hiring a Tree Trimmer guide is meant to highlight features of a tree contractor that are positives — aspects that you should look for in any company that you are considering working with. This article, on the other hand, is the opposite. It’s full of red flags! If any tree contractor has these features, then stop, and keep looking.

INCOMPLETE INSURANCE

People get insurance for their protection and also for others. The same goes for businesses. The first and top item on this list is to avoid tree contractors with incomplete or no insurance. What constitutes “complete” insurance? Due to the dangerous nature of the tree service industry, a combination of different insurances is needed to safely operate a company. But the two most vital ones are the following.

tree trimmer san diegoGeneral Liability Insurance – This type of insurance is crucial for any tree service because it provides foundational business protection. It can cover property damage and bodily injury performed on jobs. Meaning, if a tree trimmer accidentally damages your roof, this is the insurance that would help with the repair. Without it, the consumer or property owner could be held liable.

Worker’s Compensation Insurance – When the tree service industry is one of the most dangerous lines of work, you, as the consumer, NEED to hire a company that has worker’s comp insurance because this is what covers employee injuries. However, not all worker’s comp coverages are created equal. Worker’s compensation is extremely expensive! So, it can be very tempting for a tree service company to completely neglect it OR to classify themselves as landscapers in order to maximize their profits.

According to WorkersCompensationShop.com, the average rates in California for tree pruning employees range from 12.58-43.53%. This means that for every $100 that an employee earns, the company has to pay up to $43.53 in worker’s compensation. Just to give an idea of how significant that rate is, clerical office employees have an insurance rate of 0.36-0.99%.

Landscapers have an average insurance rate of about 11%. Due to workplace similarities, arborists may try to designate themselves as landscapers to take advantage of lower insurance rates. The difference, however, lies in the amount of coverage. Landscapers are able to perform tree work but are limited to typically 12 feet. Therefore, if a tree trimmer disguised as a  “landscaper” with their insurance company gets hurt when 20 feet from the ground, their insurance will not cover the employee’s injuries. As a result, the property owner will be held liable.

UNLICENSED

Never hire an unlicensed tree service contractor! It’s a plain and simple rule.

For any tree service company, acquiring a contractor’s license with the state is a lesson that should be taught in Managing a Tree Service Company 101. As a general rule of thumb, you can expect any large or reputable tree company to already be licensed. A tree service company simply wouldn’t be able to grow to such a large status without it. However, if you come across a one-man operation, it would be a good idea to verify their license.

To learn more about why licensed tree contractors are the only way to go, please visit our What to Look for in Hiring a Tree Trimmer article for more information.

VERIFY A CALIFORNIA CONTRACTOR’S LICENSE

HIGHLY-DISCOUNTED COUPONS

We’ve all seen them. Coupons for 25% off! 30% off! Who doesn’t love a good coupon? And what’s not to love? Coupons work great for shaving some dollars off of a pizza order or new shoes. Those are items that typically do not cost thousands of dollars. Tree services, on the other hand, will generally cost well over $1,000.

Due to the hazardous nature of the tree service industry, expenses are high and profit margins are low. It makes it difficult for any arborist to offer a large discount of more than 25% off. Let’s break it down. A tree company has a net profit margin of 15% (which for the arborist industry is considered to be very good). That means that after all expenses are paid, such as payroll, insurance, and gas — only 15% of revenue is left. This company quotes a customer $1,000 for a tree pruning. But wait! This particular customer has a 30% off discount coupon! That’s a whopping $300 off — leaving the business with only $700 left for wages, truck payments, gas, insurance, dump fees, etc.

The only way an arborist would be able to offer such a hefty discount is if they mark up the standard market rate for a particular service in order to make up for the loss in revenue from the coupon. This is what price gouging looks like. You need your large tree trimmed. Other companies would quote roughly $2,000. But you don’t even bother getting multiple quotes because you found an awesome coupon in a local coupon book for 30% off of tree trimming services! So why look elsewhere? You’ll be saving hundreds of dollars with this coupon! This tree service company that you contacted tells you that it would normally charge $3,000 — but since your coupon shaves of 30% — your estimate now comes to $2,100. So as you see, it still falls into the same ballpark as the other companies without the coupon.

You may wonder why all of that matters? Well, what happens next time you need your tree trimmed, but you don’t have a coupon. Will they still offer you a deal? Or is their quote going to be significantly higher? Does it mean that you’ll need to spend more time again trying to figure out what tree service company to use AGAIN? Once people find a tree contractor that they like — whose work and people they trust — they tend to stick with them. Why spend all that time researching different companies and meeting with multiple estimators, when you can just go straight to the one you know?

In addition, it’s important for you to feel like you can trust your tree service company. Discounting overinflated prices is a common sales technique that many businesses use, especially in the product-based sector. It’s a pricing strategy that is effective in moving a consumer towards a purchase because they feel like they are getting a good deal — until they do a little more research and realize that their “good deal” is in line with other quotes.

POOR CUSTOMER SERVICE

The tree service industry is filled with a wide array of characters. Some companies consist of administrative personnel and field staff. And when you have your in-person estimate, you will typically be meeting with an estimator or project manager, whose job is solely customer service. So you can expect them to be professional and have strong interpersonal skills.

On the other end, some companies are a one-man show. When you have your initial visit for an estimate, you’ll be meeting with your actual tree trimmer. Tree trimmers climb trees with chainsaws and drag brush for a living. They don’t mind getting dirty and minor injuries tend to not faze. Their goal each day is to not only do a great job with the trees they’re working on, but also quite frankly— to not die! Customer service is secondary. So sometimes, you may not get the best customer experience throughout your entire journey with this particular “contractor”.

This doesn’t mean that all one-man operations provide menial customer service. Even LC Tree Service had to begin somewhere. Some of these small companies are run by great people who are highly proficient at what they do. So whether you’re dealing with a single person or a large enterprise, it’s important that you have good interactions. Do you feel that your trees are in good hands? Do you feel like your requests were heard and will be taken care of? Do you feel like you can trust the individual and the company? If you don’t, then you should look elsewhere.

LET’S SUMMARIZE

AVOID A TREE SERVICE COMPANY THAT:

San Diego tree trimmers

LOOKING FOR A RELIABLE TREE SERVICE COMPANY?

LC TREE SERVICE WOULD BE HAPPY TO HELP!

619.677.5777

START YOUR FREE ESTIMATE

The post WHAT TO AVOID IN HIRING A TREE TRIMMER first appeared on San Diego Tree Trimmers – LC Tree Service.
Did you miss our previous article…
https://www.treesforeducation.com/?p=279

10 MOST COMMON FLOWERING TREES IN SAN DIEGO

tree trimming san diego flowering tree
tree trimming san diego flowering tree
tree trimming san diego flowering tree

Spring season is that wonderful time of the year when colorful blooms begin to flourish throughout many parts of the world. But in the city of San Diego, we have the luxury of being able to enjoy flowering plants and trees all throughout the year due to our mild and sunny climate. In fact, many landscapers and property owners strategically plan their landscape so that there is always a flowering plant or tree from winter through autumn. As one tree’s flowering season ends, another one begins.

Whether you’re looking to add a flowering tree to your property or just plain curious, we’ve compiled a list — in no particular order of popularity — of what we consider to be the most common flowering trees in San Diego.

tree trimmers san diego flowering tree
tree trimmers san diego flowering tree

1

JACARANDA

Jacaranda mimosifolia

Jacarandas are one of San Diego’s most spectacular flowering trees. In late spring into the summer months, it’s hard to go a day driving through town without seeing at least one jacaranda and its popular lavender, bell-shaped blooms. These flowers grace us with their presence for two months before falling and creating a carpet of color on the ground beneath.

When not in bloom, the jacaranda is still one of San Diego’s finest-looking ornamental trees. Once established, it’s a fast-growing tree that develops a bright green canopy of fern leaves against the tree’s grayish-brown limbs. It grows fast, but its size at full maturity is quite manageable because it typically only grows to roughly 25 to 40 feet in height, with similar dimensions in canopy spread. The jacaranda is also a popular choice with urban planners due to its “pavement friendly” roots, which, unlike some other common trees like the ficus benjamina, is less likely to damage sidewalks and streets.

There are many wonderful features associated with the jacaranda, but even this beauty can’t be perfect in all aspects. Unfortunately, the jacaranda is a deciduous tree, which means that it loses its foliage every year. So for the winter months, you’re left with an arrangement of bending grey wood in your outdoor space. But hey…neutral colors are all the rage…so apparently it works. As the weather begins to warm up, the tree’s foliage slowly fills the canopy with yellowish-green leaves. It looks sparse and a little sickly, depending on the tree. Not very appealing, to say it nicely — but when the warmest and sunniest season arrives, the jacaranda’s beauty shines once again with its lush green canopy, followed by its magnificent purple blooms.

tree trimmers san diego flowering tree
tree trimmers san diego flowering tree

2

MAGNOLIA

Magnolia grandiflora

The magnolia tree is a very well-known name in the flowering tree category. For all you home decorators, think Joanna Gaines and her popular Magnolia Homes company. But what many do not know is that it is also the most ancient flowering plant that we know of according to fossil records. Surviving through ancient history, there are more than 200 magnolia species that originated mostly in Asia and in the Americas. They are common trees throughout the world, especially in sub-tropical and tropical regions, and are known for their stunning flower display with pink, purple, white, and even yellow blooms.

The most common magnolia in Southern California is the Southern magnolia. It possesses large evergreen leaves that exhibit a deep green color and a unique brownish touch. Then in the late spring and into the summer, the Southern magnolia unveils its beautiful, large, white flowers that contrast so well against its green foliage backdrop. When we say large, we mean large, as the oval-shaped leaves typically range from 5-8 inches in length, and its fragrant flowers possess an 8-inch diameter range.

Compared to the other popular flowering trees on this list, the Southern magnolia is a rather slow-growing tree and is known to take up to 10 years after planting to even blossom. So patience is required! But it won’t stay little forever. It typically matures to a height of 60-80 feet with a canopy spread of roughly 40 feet, and in its most ideal conditions, it even grows taller than 80 feet!

When it comes to trimming a magnolia tree, great news! They don’t require much. But the bad news is that these trees are FINICKY! Trim your tree at the wrong time of the year, and you can kiss the next year’s beautiful flower display goodbye. Even worse, given the right candidate, you could end up killing your tree. Magnolias, especially mature ones, tend to have a hard time recovering from injuries. The best time to trim them is right after its flowering season so that it has sufficient time to heal before winter. Otherwise, trimming a magnolia during the wrong season can result in excessive bleeding, which could weaken the tree and leave it vulnerable.

tree trimmers san diego flowering tree

3

TIPUANA TIPU

Tipuana tipu

Native to South America, the Tipuana tipu, or tipu for short, is one of San Diego’s most popular trees. When not in bloom, it can often be mistaken for the jacaranda, since the two have very similar structures and fern-like foliage. Even arborists, at a distance, may need a moment to determine who’s who. However, once its sunny yellow flowers emerge in the spring and into the summer, there’s no mistaking the two trees.

With its roots in a tropical homeland, the tipu thrives in areas with plenty of warm sunlight, so make sure to plant it in a location with full sun. It loves the heat and can handle San Diego’s hot and dry summers extremely well. This is why it is also a popular choice for desert communities.

The tipu is a choice selection for properties and urban development throughout San Diego due to its rapid growth, pavement-friendly roots, drought resistance, and flowery display. It’s perfect for all you impatient folks who don’t want to wait 10 years for their newly-planted young tree to provide ample shade and a majestic presentation. And even better, if you’re not interested in a huge tree, the tipu is a great choice, as they are medium-sized trees that are usually seen in the 30-50ft range with a wide canopy spread that matches its height.

The Tipuana tipu is a fast-growing tree that typically grows 2-3 feet a year! A young tree has the potential to quickly develop a canopy width of 20 feet just a few years after being transplanted. Due to this rapid growth, it’s important to keep your tipu on a regular trimming schedule. Otherwise, the tree ends up looking like an unkempt child with neverending bedhead. But when properly trimmed, the tipu has the potential of looking amazing — whether it’s covered with yellow blooms or not!

tree service san diego flowering tree
tree service san diego flowering tree

4

PALO VERDE

Parkinsonia florida, Parkinsonia microphylla, Cerdium ‘ Desert Museum’

The palo verde is another common yellow-blooming tree in San Diego. The name in Spanish means green stick because, as you can guess, it possesses limbs that are green! It’s a unique sight, especially with its yellow blooms that complement the green so well. As the palo verde matures, its trunk and mature branches eventually turn brown, but any new limbs grow out green. Why green? The bark of the palo verde is uncommonly filled with chlorophyll, which allows it to participate in photosynthesis — a job that is normally assigned to the leaves. But for this green wonder, its foliage only contributes one-third of the tree’s food.

Even with its unconventional green limbs and showy flowers that allure people, the palo verde is still one of those trees that you either love or hate. It’s actually a tree that tree trimmers can’t stand! Why? Because these trees are notorious for pain! Yes, their green branches are awesome to look at, but with close examination, you’ll realize that they’re covered with sharp spikes. It’s a desert tree, and it seems to have copied the same spiky qualities of its desert best friend (the cactus, of course). It’s like middle school cliques dressing the same. “Make sure to wear your spikes on Friday!”

As with any tree, one of the palo verde’s goals is reproduction. No harm there. However, this tree is like the “rabbit of the tree world.” Palos love to procreate, and they’re good at it. If left unmanaged, a single tree on a property can multiply into a grove of more than 20 palo verdes in less than 10 years. Also, the tree’s cute and innocent-looking babies don’t go without a fight. Remember those spikes? If you simply go in to pull a baby palo out with bare hands, chances are you’ll get stabbed. It is best to carefully pull at the base where spikes tend to not grow or to use pliers.

tree service san diego flowering tree
tree service san diego flowering tree

5

EVERGREEN PEAR

Pyrus kawakamii

Native to Taiwan, the evergreen pear is one of San Diego’s standout trees. Is it because it produces a vibrant colorful display of flowers like other trees on this list? No. Does it have delectable juicy pears to eat? No, again. So what’s so special about the evergreen pear? While this tree doesn’t boast of colorful springtime blooms or delicious fruit to eat, it “sticks out of the crowd” due to its distinct flowering season. In the winter, when other trees, like the jacaranda and palo verde, are plain and bare, the evergreen pear showcases its large clusters of white blossoms. It’s a wintry display that’s very appropriate to the season. We may not get snow in the streets of Downtown San Diego or our famous Balboa Park, but we get snow-white laden trees!

The evergreen pear, despite what the name implies, is not an evergreen. It is called an evergreen tree because it has a very short dormant period, causing some people to label it semi-deciduous. In the fall, its foliage morphs to an orangish-red, which drops shortly afterward. Fortunately, it only stays bare for a short period because soon afterward, its canopy becomes engulfed in showy white blooms through the rest of the cold winter season. Then at the end of winter or stretching into spring, the flowers fall to the ground and create a lovely frosty carpet.

The evergreen pear tree — despite its name — does not produce sweet pears for people to eat. Instead, it grows little, brown, inedible fruit that can create a messy nuisance during drop season.

So to sum it up — the evergreen pear is not an evergreen tree, and it doesn’t produce edible pears. Evergreen pear. Just a bit of a misnomer…just a tad.

tree service san diego flowering tree
tree service san diego flowering tree

6

CRAPE MYRTLE

Lagerstroemia

The crape myrtle tree, also spelled crepe mrytle, is one of San Diego’s most beautiful flowering trees. It’s a dainty little thing that can be found in different varieties with differing height potentials. It ranges from the “very dwarf” varieties that only mature to a range of 1-3 feet to the regular-sized crape myrtles that “soar” to 20 feet. Then there are the varieties in between — dwarfs, semidwarfs, and small. Crape myrtle trees possess colorful flower clusters available in red, pink, lavender, purple, or white. These fragrant flowers grow in puffy clusters that end up dominating the tree’s canopy in the summer and create beautiful displays in San Diego’s landscape.

The crape mystle’s origins take root in China, where it was named “Pai Jih Hung” — meaning hundred days red. Why? Because the crape myrtle has an amazingly long flowering season that lasts 3-4 months! Quite impressive when you consider that the jacaranda tree’s bloom season lasts 2 months, and the magnolia’s flowers appear for a whopping 7-9 days! While the tree was originally named after its long bloom season, here in the United States, it derived its name from the crinkly appearance of its flowers, which resemble crepe paper.

Aside from its stunning display, the crape myrtle has other features that make it a great tree to add to your property. It is unfazed by the hot summer days and drought conditions. But make sure not to test your crape myrtles heat and drought endurance until its roots are well-established. This tree loves the sun, so also make sure to plant it in an area that receives plenty of sunshine. Otherwise, you may have to miss out on its colorful blooms, as it may not produce flowers if it doesn’t receive enough direct sunlight.

tree service san diego flowering tree
tree service san diego flowering tree

7

CORAL TREE

Erythrina

This next tree shares a striking resemblance to ocean corals. We’re talking about the coral tree, of course — a common and fitting sight for beach-loving San Diego. With roughly 130 species of coral trees (Erythrina), this is a popular tree, not just in California, but in temperate, subtropical, and tropical zones worldwide. It even happens to be the national flower of Argentina and Uruguay.

While many coral trees love the tropical heat (as you can see from their places of origin), quite a few do well in San Diego’s semi-arid climate. About a dozen Erythrina species call San Diego home. These include the naked coral from Mexico, the coastal coral and Tambookie thorn coral from Africa, and the Erythrina x sykesii from Australia. And as heat-loving trees, you might have guessed that coral trees require full-sun exposure to thrive, so make sure to plant accordingly, and don’t worry when it gets over 100° outside. Your coral tree is in “sunshine buffet heaven.”

Our local coral trees are distinguishable by their long, thick secondary branches that stem from a SHORT trunk. Some trunks are so short that they seem to barely rise up out of the ground. But just because it posses a short trunk, it doesn’t mean that the rest of the tree stays short, as it has an average height of 20-40 feet and a wide canopy width of 40-60 feet.

When the tree’s branches start at a low point, it looks like the perfect climbing tree for children. But it’s actually deceiving because the coral tree is notorious in the tree service industry for its susceptibility to breakage and tree failure. This is due to its brittle wood, poor structure, and tendency to form included bark, which is basically a weak junction between two limbs that is prone to splitting given the right amount of pressure. So the coral tree is definitely not the tree you would want to build a treehouse in or hang a swing on. Not to mention, some species also have thorns protruding from their trunk and stems.

Now to the flowers. The coral tree’s blooms are in a class of their own. With their fiery-red color and finger-like appearance, the name Erythrina actually stems from the Greek word for red — erythros. Most Erythrina species develop large, red flowers, but some also display deep orange blooms. When most flowering trees in San Diego flaunt white, yellow, or soft hues of pink or purple, the coral tree’s brilliant red makes this tree’s flower presentation an exotic attention-grabber. You can also see its blooms earlier than other trees due to the coral tree’s tendency to display its flowers in the early spring, as opposed to late spring, like most of the other flowering trees in San Diego.

tree service san diego flowering tree
tree service san diego flowering tree

8

WESTERN REDBUD

Cercis occidentalis

Some flowering trees, such as the magnolia and mimosa trees, still retain a good portion of their foliage during bloom season. Other trees become immersed in blooms. The Western redbud is one of those trees. In the spring, hordes of purplish-pink flowers sprout all along the tree’s limbs which last for 2-3 weeks.

There are over 10 redbud species throughout the world, but only two are native to North America. As you may have already guessed, the Western redbud originates from the American Southwest — more specifically from southern Utah, Nevada, Arizona, and California. In fact, it has even been named the California redbud, as it’s a native tree that you can find in canyon bottoms, creeks, and other areas with moister soil in California.

Growing to a height of only 10-20 feet and 10-15 feet wide, the Western or California (whichever name floats your boat) redbud is a great choice for anyone desiring a small tree with pastel-colored blooms. This truly is a springtime tree because unlike many of San Diego’s other flowering trees that hold onto their blooms until summer, the Western redbud typically only possesses its flowers from March to May.  It really does scream, “Springtime is here!” with its showy flaunting of pink and purple hues.

The Western redbud is a tree that loves the seasons. In the spring, it bedazzles us with its lovely flowers. Then it drops its blooms to make way for its green, heart-shaped foliage, all ready to soak up the hot sun in the summer.  In the fall, the green foliage transforms into comforting autumn colors, which eventually drops toward the end of the year to expose a naked “winter-looking” tree. But be patient, because like clockwork, when the first month of spring comes around, so will those charming blooms!

tree service san diego flowering tree

Photo credit: cultivar413

San Diego flowering tree

9

GOLD MEDALLION TREE

Cassia leptophylla

The gold medallion tree showcases an explosion of yellow pom-poms during San Diego’s summer months. With its basketball-size flower clusters growing on the ends of its limbs, it truly does look like an explosive fireworks display!

Stemming from Brazil, this is a tropical tree that does best in tropical climates, but still manages to flourish in San Diego’s dry climate. If you’ve visited some of the tropical regions in the United States, the gold medallion probably reminds you of some of the trees from those states. That’s because it has two very popular cousins — the golden shower tree that is so common in the South and the rainbow shower tree that populates the Hawaiian Islands. Both have amazing flower spectacles and so does the gold medallion tree! It’s a family trait.

The gold medallion is a fast-growing tree that sprouts to about 20-25 feet in height, with an average canopy spread of 20-30 feet that is composed of long compound leaves. Being a tropical tree, it does well through San Diego’s heat spells and requires a planting location that receives full sun. After being translated, the gold medallion will require a frequent water schedule until its roots become well-established. Then it will require less water and will tolerate drought conditions very well.

Like other common flowering trees in San Diego, the gold medallion is a member of the legume family, so after the flowers drop, LOOOONG brown seed pods that can grow to about two feet in length begin to take over the canopy. Not too pretty of a sight when you see a populace of brown seed pods dangling from a tree, especially when that tree was looking quite dapper with its green foliage and showy yellow blooms just a few months prior — but beauty is fleeting.

tree service san diego flowering tree
tree service san diego flowering tree

10

MIMOSA TREE

Albizia julibrissin

If you like the sight of hummingbirds, then the popular silk tree, also known as the mimosa tree, would make a great addition to your property’s landscape. Hummingbirds, bees, and butterflies absolutely love this tree’s uniquely-shaped, pink blooms.  And even better, property owners love this tree for its total package. This is a tree that is not only stunning when it’s in bloom, but it’s also extremely hardy, fast-growing, and easy to care for.

Originating from China, the silk tree was brought to the United States in the mid-18th century, and now can be found in most states from coast to coast. It derived its name, silk tree, from its flower puffs that resemble silk threads. If you have ever traveled to Hawaii, this is a tree that brings a sense of familiarity because it looks nearly identical to its cousin, the monkeypod tree, which reigns as one of Hawaii’s most prominent trees. The silk tree possesses a tropical display and does very well in high temperatures. While it may not be the tropics, it still flourishes in the dry, hot summer months in San Diego. It may be a heat-tolerant and drought-tolerant tree, but being a tropical tree, if you want your mimosa to reach its highest potential, then it would be best to keep it on a regular, deep-water schedule.

In the late spring and into the summer months, the mimosa tree shifts into “bedazzle” mode when its pink blooms emerge. Unfortunately, as the saying goes, “All good things must come to an end.” It holds true with the silk tree. After its beautiful bloom season ends, the tree’s “ugly” season begins, as its gorgeous art show turns into a sad exhibit of 6-inch seed pods. Initially, it’s not too bad, but then the tree’s fern-like foliage drop when the temperatures begin to drop. Then in the winter, all that is left is a straggly, leafless tree with hundreds of drooping, brown seed pods.

As with any tree, when the silk tree is first planted in a new location, it goes through a shock period that can last a couple of years. You won’t see much action during this time. You won’t even see flowers. But once its roots get firmly established (typically 2-5 years), the tree quickly grows until it reaches its plateau height, which typically lands in the 20-30ft range. And after years of waiting, you’ll finally get to see those spectacular flower clusters. But before that happens, the tree needs to reach a certain level of maturity before it can produce flowers. In general, the mimosa typically doesn’t start producing blooms until it reaches a height of 10 feet.

LOCAL SAN DIEGO NURSERIES

Evergreen Nursery

Armstrong Garden Centers

Moon Valley Nurseries

San Diego tree trimmers

NEED TREE TRIMMING OR REMOVAL SERVICES?

LC TREE SERVICE WOULD BE HAPPY TO HELP!

619.677.5777

START YOUR FREE ESTIMATE

The post 10 MOST COMMON FLOWERING TREES IN SAN DIEGO first appeared on San Diego Tree Trimmers – LC Tree Service.